4
The battery charger must be connected to the battery according to the
instructions mentioned previously.
Starting the charging process:
1.
Once you have established that the battery clamps or eyelets have been
correctly connected, you can start the charging process. To do so, insert
the charger plug into the AC socket.
2.
The charger will start in Standby mode, indicated by the STAND BY LED.
3.
Press the mode button to select the appropriate charge mode (press
and hold for three seconds to enter an enhanced charge mode) for the
voltage and chemistry of your battery. The selected charge mode LED
will illuminate.
CHARGING:
LED DISPLAY:
The state-of-charge (SOC) LED display has four (4) SOC indicators.
LED
Explanation
25% Red LED
The LED will flash when the battery is less than
25% charged. When the battery is 25% charged,
the LED will be solid.
50% Orange LED
The LED will flash when the battery is less 50%
charged. When the battery is 50% charged, the
LED will be solid.
75% Yellow LED
The LED will flash when the battery is less 75%
charged. When the battery is 75% charged, the
LED will be solid.
100% Green LED
The LED will flash when the battery is less than
100% charged. When the battery is 100% charged,
the LED will be solid.
