4
1. Description
Type
Battery
voltage
Total battery
numbers (pcs)
Applicable
battery
capacity
Applicable
UPS model
Minimum required
QTY
per UPS module
(pcs)
BP 96-120V
±
96V ~
±120V
16~20
7Ah/9Ah/10Ah
2-2 6K LV
1
3-3 10K LV
1
3-3 10K
2 (serial
connection as one
group)
3-1 10K
1-1 10K
This manual only contains how to install batteries inside of battery pack. For the wiring of battery
pack and UPS, please refer to UPS manual.
It can be installed either fl
atly in the 19’’ cabinet or vertically in floor
-standing tower.
2. Package contents
Battery pack Manual Mounting ears
Slides 4 long extensions Parallel busbars
NOTE:
Before installation, please inspect the unit. Be sure that nothing inside the package is
damaged. Do not use the unit and notify the carrier and dealer immediately if there is any damage
or lacking of some parts. Please keep the original package in a safe place for future use.
Make sure to take the battery pack out of the package in the right way. At least two persons need
to hold on the braid belts at the same time to lift the battery pack.
Battery Pack Quick Guide
Battery serial PCB, Brass
spacer, Insulator
paper, Long busbars
Fixing nut X 8, M6 screw X 10,
M6 stud X 2, M4 screw X 4,
M3 screw X 2
