PowerTec UT1002 Owner'S Manual Download Page 3

SAFETY RULES

1

1

SAFETY RULES

     WARNING

t %POPUVTFGPSTDBGGPMEJOHPSBTMBEEFS%POPUTUBOEPS

climb on the universal stand; it could tip over, causing 
serious injury.

t %POPUPWFSMPBE5IFNBYJNVNDBQBDJUZGPSUIF

universal stand is 500 lbs (227 kg).

t %POPUBQQMZBOVOCBMBODFEMPBE5IJTDPVMEDBVTFUIF

universal stand to tip over.

t 4UPSFUIFTUBOEQSPQFSMZ%POPUTUPSFUIFVOJWFSTBM

stand outdoors or in a damp location.

t ,FFQUIFXPSLBSFBDMFBOVODMVUUFSFEBOEXFMMMJU%P

not work on or place the universal stand legs on floor 
surfaces that are slippery from sawdust, oil, water or 
wax.

t ,FFQDIJMESFOBOECZTUBOEFSTBXBZXIJMFPQFSBUJOHB

QPXFSUPPM%JTUSBDUJPOTNBZDBVTFZPVUPMPTFDPOUSPM

Visitors should wear the same safety equipment as the 
operator.

t 8IFOVTJOHBQPXFSUPPMXJUIUIFVOJWFSTBMTUBOE

always follow the safety instructions in the power tool’s 
operator’s manual.

t "MXBZTXFBSTBGFUZHMBTTFTPSFZFTIJFMETXIFO

operating power tools.

t %SFTTQSPQFSMZ%POPUXFBSMPPTFDMPUIJOHPSKFXFMSZ

,FFQZPVSIBJSDMPUIJOHBOEHMPWFTBXBZGSPNNPWJOH

parts. Loose clothes, jewelry or long hair can be caught 
in moving parts. Always wear non-slip footwear. Tie 
back long hair. Roll long sleeves above the elbow. 

t "MXBZTVTFDMBNQTPSPUIFSQSBDUJDBMXBZTUPTVQQPSU

the work piece and secure it to a stable platform. 
Holding the work piece by hand or against your body is 
unstable and may lead to loss of control.

t $IFDLBMMIBSEXBSFQSJPSUPNPVOUJOHBOZCFODIUPQ

tools.

t *OTQFDUBMMIBSEXBSFQFSJPEJDBMMZBOEUJHIUFOBOZUIBU

may be loose.

t #FTVSFUPVTFUIFQSPQFSNPVOUJOHCPMUTGPSUIFVOJU

being attached to the stand.

     WARNING

For your own safety, read all of the rules and precautions 
before operating tool.

     WARNING

%POPUNPEJGZUIJTUPPMBOEPSVTFJUGPSBOZBQQMJDBUJPO

other than that for which it was designed.

     WARNING

Always follow proper operating procedures as defined in 
this manual even if you are familiar with use of this tool 
stand or any tool used with this stand. Remember that 
being careless for even a fraction of a second can result in 
severe personal injury. 
You must be familiar with the use of any tool or accessory 
used with this stand. The supplier cannot be held 
responsible for any accident, injury or damage incurred 
while using this stand with any tool.

READ AND SAVE THESE INSTRUCTIONS

Summary of Contents for UT1002









Reviews: