background image

Page 24 

 
 
A - Guarantee 
 
To be retained by the user. 
 
Your new chair with standing aid is guaranteed as follows from the date of delivery: 

 TWO years against all manufacturing faults except for the pneumatic units and upholstery, which are not 

covered by the guarantee. 

 ONE year against all manufacturing faults for electrical parts: added standing aid kit, motorisation kit. 

 SIX months for batteries (charger and control wire are not guaranteed). 

 
§I: Scope of the Guarantee: 
The  guarantee  covers  all  labour  and  replacements  for  those  parts  to  be  defective  after  inspection  by  our 

experts. 

 
§II: Terms of Guarantee: 
The guarantee is granted on condition that the equipment has been supplied by a Stand Mobility approved 

supplier and is used under ordinary operating conditions. 

The guarantee does not cover faults arising from: 
 - Normal wear or fatigue; 
 - Abnormal use; 
 - Failure to maintain the chair; 
 - Any modifications out of the manufacturers control. 
 
Similarly,  it  does  not  cover  metal  parts  that  have  been  modified  by  any  person  whatever  since  they  were 

supplied, either by adapting the original parts or by fitting new parts from other manufacturers. 

 
Where parts are replaced or reconditioned under the guarantee, this does not extend the guarantee period. 
 
Since the responsibility of Stand Mobility is expressly limited to the above terms and conditions, the company 

cannot be held responsible for any loss, damage or claim by third parties arising from any defect whatsoever 
that is covered by this guarantee. In the event of a return to the factory, the client shall be responsible for 
onward and return transport costs. 

 
 
********************************************************************************************************* 

– Guarantee certificate 

 
To fill in and to be returned to the manufacturer address:  

 

 
Suriname 

: ……………………………….……… First name:………................................…….  

Address: ……………………………………………………………………………………………... 
GSM

: ………………. 

Age:……..….  Height :……….   Weight :………  Pathology :…………………………………… 
Chair’s number :………………….    Model :……………………………………………………….. 
Standing aid kit number :…………….……….Purchase date :…..………………………………… 
Dealer name 

:…………………………………………………….………………………………….. 

 

 

Chapiter VIII – GUARANTEE CERTIFICAT 

Summary of Contents for P-Access


























Reviews: