10 | MOVER | User guide
11 : 1.How to integrate your MOVER ID
The following figure shows a schematic representation of a
possible integration design for the MOVER ID.
1. Moving Object
2. Mover ID
1
2
11 : 1.1. Practical instructions and precautions
11 : 1.2. Max Torque on mounting screws
1
1
2
3
3
1.
SCREWS
Metric M5
Nominal length:
12 mm (15⁄32 in),
max
L =
th
+
{
8 mm (5⁄16 in),
min
where th=Thickness of the connection plate
2.
HOLES
Diameter must be suitable for metric M5 screws
Centre-to-centre distance: 80 mm or 3 5/32 in (see
Mechanical Drawings for more details)
3.
WIRING
Fix wires to the structure where the Mover ID. This is to avoid
damages on wires due to vibrations. Keep in mind what explained
in previous section Polarity.
•
4 x M5
metric screws required
to fix the Mover to an immovable
object from too connection points
•
MAX TORQUE
:
4 Nm
(35 lbf·in)
•
4 x M5
metric screws required
to fix the Mover to an immovable
object from bottom connection
points
•
MAX TORQUE
:
4 Nm
(35 lbf·in)
Dimensions expressed in mm.
Mover ID - Integration instructions
11
Summary of Contents for MOVER
