Important safety instructions
1
This amplifier module is intended to be installed inside
other devices and must be checked in the final product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This unit has been engineered and manufactured to ensure your personal
safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARD.
In order not to defeat the safeguards incorporated into this product, observe
the following basic rules for its installation, use and service. Please read these
“Important Safeguards” carefully before use.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Do not block any ventilation openings. Install in accordance with
Powersoft’s instructions.
7. Do not install near any heat sources such as radiators, heat regis-
ters, stoves or other apparatus that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-
type plug.
9. Only use attachments/accessories specified by Powersoft.
10. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
11. The apparatus shall be connected to a MAINS socket outlet with a
protective earthing connection.
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE,
DRIPPING OR SPLASHING LIQUIDS. OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS
APPARATUS.
SPEAKER TERMINALS COULD BE HAZARDOUS LIVE IF
SPEAKER BRIDGE MODE CONNECTION IS USED.
PROPER CONNECTIONS AND INSULATIONS TECHNIQUES
MUST BE ADOPTED WHEN SPEAKER BRIDGE MODE
CONNECTION IS USED.
CLASS3
WIRING
THE TRIANGLE WITH THE LIGHTNING BOLT IS USED TO ALERT
THE USER TO THE RISK OF ELECTRIC SHOCK.
CLASS3
WIRING
THE TRIANGLE WITH THE EXCLAMATION POINT IS USED TO
ALERT THE USER TO IMPORTANT OPERATING OR MAINTENANCE
INSTRUCTIONS.
THE CE-MARK INDICATES THE COMPLIANCE OF THE PRODUCT
TO ALL THE APPLICABLE EUROPEAN DIRECTIVES
SYMBOL FOR EARTH/GROUND CONNECTION.
SYMBOL FOR CONFORMITY WITH DIRECTIVE 2012/19/EC OF
THE EUROPEAN PARLIAMENT ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT (WEEE).
+35°
C
0 °C
0°C TO +35°C
DERATING ABOVE 35°C.
10%
90%
%
10% TO 90% HUMIDITY (NON CONDENSING).
DO NOT USE THE UNIT AT ALTITUDES ABOVE 2000 M.
DO NOT USE THE UNIT IN TROPICAL ENVIRONMENT.
CLASS3
WIRING
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT ATTEMPT TO OPEN ANY PART OF THE UNIT. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS3
WIRING
CONNECTION TO THE MAINS SHALL BE DONE ONLY BY A
ELECTROTECHNICAL SKILLED PERSON ACCORDING THE
NATIONAL REQUIREMENTS OF THE COUNTRIES WHERE THE
UNIT IS SOLD.
CLASS3
WIRING
VERIFY THAT YOUR MAINS CONNECTION IS CAPABLE OF
SATISFYING THE POWER RATINGS OF THE DEVICE.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGES
CAUSED TO PERSONS, THINGS OR DATA DUE TO AN IMPROPER OR
MISSING GROUND CONNECTION.
CONTACT THE AUTHORIZED SERVICE CENTER FOR ORDINARY AND
EXTRAORDINARY MAINTENANCE.
IT IS ABSOLUTELY NECESSARY TO VERIFY THESE FUNDAMENTAL
REQUIREMENTS OF SAFETY AND, IN CASE OF DOUBT, REQUIRE AN
ACCURATE CHECK BY QUALIFIED PERSONNEL.
Important safety instructions | iii
