powersoft DigiMod IS Series Technical Notes Download Page 2

Page: 2 / 2

Via Enrico Conti, 5

50018 Scandicci (FI) Italy

Tel: +39 055 735 0230

Fax: +39 055 735 6235

General inquiries:

Sales:

Application & technical support:

Service & maintenance:

Make one cable XLR male / Phoenix 5 poles following this

schematic pin:

With the same pin configuration use the other phoenix 5 poles

connector to make the parallel input.

Connect this cable to the phoenix input connector on DigiMod

amp module

FIGURE 7: Phoenix_input.png

Phoenix

GROUND

HOT

COLD

XLR male

GROUND

HOT

COLD

powersoft_TN016_RemoveDSPC_en_v1.0

Summary of Contents for DigiMod IS Series

Page 1: ...P C Take the Phillips screwdriver to remove the 2 screws from the DSP C Take the flathead screwdriver and push out the DSP C from the sim board With the aid of the pliers add the 2 jumpers on the pins...

Page 2: ...wersoft it www powersoft audio com Make one cable XLR male Phoenix 5 poles following this schematic pin With the same pin configuration use the other phoenix 5 poles connector to make the parallel inp...