Powersmart PS76425 Instruction Manual Download Page 12

 

12 

MAINTENANCE 

 

WARNING:

 In order to avoid personal injury and the risk of fire and electric shock, 

remove the battery pack before adjusting, inspecting, or cleaning the power tool. 

 

WARNING:

 When servicing, use only identical replacement parts. Use of any other parts 

could create a hazard or cause product damage. 

 

 

Be alert for battery packs that are nearing their end of life. If you notice decreased tool performance 

or significantly shorter running time between charges then it is time to replace the battery pack. 

Failure to do so can cause the tool to operate improperly or damage the charger. 

 

Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not attempt 

to clean by inserting pointed objects through opening. 

 

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from 

various types of commercial solvents and may be damaged by their use. Use clean clothes to remove 

dirt, oil, grease, etc.  

 

Ensure that no water can seep into the device. The ingress of water into an electric tool increases the 

risk of an electric shock. 

 

 

TROUBLE SHOOTING 

 

WARNING: 

Read instruction manual first! Remove battery pack from the tool before 

making adjustments or assembling accessories.

 

 

 

TROUBLE: TOOL WILL NOT START 
 

 

PROBLEM 

1. Battery pack not charged. 

2. Battery pack not installed properly. 

3. Battery pack temperature is too hot or cold for operation. 

4. Burned out switch. 

 

REMEDY 

1. If equipped, check battery charge condition lights for charge status. Charge 

battery if needed. 

2. Confirm battery is locked and secured to the tool. 

3. Let battery sit a few minutes or until it reaches normal operating temperature. 

4. Replace the switch provided by POWERSMART.

 

 

TROUBLE: BATTERY PACK WILL NOT CHARGE 
 

PROBLEM 

1. Charger not plugged into outlet. 

2. Battery pack not completely inserted into charger.

 

 

REMEDY 

1. Confirm charger is plugged into outlet. 

2. Confirm battery pack is inserted into charger completely. 

 

 

 

Summary of Contents for PS76425
















Reviews: