Powersmart PS76105A, Instruction Manual, Page: 13 / 17

13
MAINTENANCE
WARNING: To avoid serious personal injury, always remove the battery pack from the
product before inspecting, cleaning or performing any maintenance.
Warning: Always wear eye protection with side shields marked to comply with ANSI Z87.1.
If operation is dusty, also wear a dust mask.
Warning: When servicing, use only identical replacement parts. Use of any other parts may
create a hazard or cause product damage.
Note: Periodically inspect the entire product for damaged, missing, or loose parts such as screws, nuts,
bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or
damaged parts are replaced.
STORING
•
Always place the scabbard on the blade before storing or transporting the hedge trimmer. Use caution
to avoid the sharp teeth of the blade.
•
Clean the hedge trimmer thoroughly before storing. Store the hedge trimmer indoors, in a dry place
that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and
de-icing salts.
LUBRICATING THE BLADE
Warning: Always allow the blades of the hedge trimmer to come to a stop and remove the
battery before lubricating. Failure to do so could result in accidental starting causing possible
serious personal injury.
For easier operation and longer blade life, lubricate the hedge trimmer blade before and after each use.
•
Remove the battery pack from the hedge trimmer.
•
Lay the hedge trimmer on a flat surface. Apply light weight machine oil along the edge of the top
blade.
NOTE: If you will be using the hedge trimmer for an extended time, it is advisable to oil the blade
periodically.
•
Stop the hedge trimmer.
•
Remove the battery pack.
•
Lubricate the hedge trimmer as described above.
•
Reinstall the battery pack and resume use.
CLEANING THE HEDGE TRIMMER
•
Remove the battery pack.
•
Slide the scabbard over the blade.
•
Clean dirt and debris from the body of the hedge trimmer, using a damp cloth with a mild detergent.
NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by
certain aromatic oils such as pine and lemon, and by solvents such as kerosene.
•
Moisture can cause a shock hazard. Wipe off any moisture with a soft dry cloth.
•
Use a small brush or the air discharge of a small vacuum cleaner brush to clear dust or debris from the
blade on the motor housing.
ENVIRONMENTALLY SAFE BATTERY DISPOSAL