Powersmart PS6140, Instruction Manual, Page: 11 / 15

11
MAINTENANCE
WARNING: Disconnect wrench from air supply before changing accessories, servicing or performing
maintenance. Replace or repair damaged parts. Use genuine parts only. Non-authorized parts may be
dangerous.
1. Lubricate the air wrench daily with a few drops of air tool oil dripped into the air inlet
2. Air-operated tools must be inspected periodically and worn or broken parts must be replaced to ensure
that the tools are operating safely and efficiently.
3. Inspect and replace worn or damaged 0-ring, seals, etc. Tighten all screws and caps frequently in order
to help prevent personal injury.
4. Keep the magazine of the tool clean and free of any dirt or abrasive particles.
5. The tool should be properly lubricated by keeping the in-line lubricator filled and correctly adjusted.
Without proper lubrication. The tool will not work effectively and parts will wear prematurely.
6. Inspect the tool periodically and replace worn or broken parts in order to keep tools operating safely
and efficiently.
7. Tighten all screws and caps frequently in order to prevent injury.
8. Inspect the trigger, the spring, and safety mechanism for free movement on a regular basis in order to
Ensure that the safety system is fully functional. Verify that no parts are loose or missing.
STORAGE
When the tool is not in use , disconnect it from the air supply, clean, and store it in a safe, dry, childproof
location.
When the tool is stored for longer period of time, apply an ample amount of lubricating oil before storing.
Run the tool for approximately 30 seconds after lubricating, in order to ensure that the lubrication is
uniformly distributed throughout the tool. Store the tool in a clean and dry environment.