Powersmart PS1130, Instruction Manual

Page: 6 / 32

6
IMPORTANT SAFETY INSTRUCTIONS
This machine is capable of amputating hands and feet and throwing objects. Failure to observe the
following safety instructions could result in serious injury or death.
Set up precautions

Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and
handling procedures. Do not store fuel or other flammable materials nearby.

Have multiple ABC class fire extinguishers nearby.

Operation of this equipment may create sparks that can start fires around dry vegetation. A spark
arrestor may be required. The operator should contact local fire agencies for laws or regulations
relating to fire prevention requirements.

Set up and use only on a flat, level, well-ventilated surface.

Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during
set up.

Use only lubricants and fuel recommended in the Specifications chart of this manual.
Operating precautions

Keep children away from the equipment, especially while it is operating.

Locate the Chipper/Shredder on a flat, level, sturdy surface capable of supporting the weight of
the Chipper/Shredder and any additional tools and equipment.

Be extremely cautious of the rotating Blades in the Chipper/Shredder. Never allow your hands,
fingers, or any other part of your body to enter the Chipper Chute or Hopper.

Never place your hands, fingers, feet, or any other part of your body close to the Discharge
Opening while the Chipper/Shredder is in operation.

Do not look into the Hopper, Chipper Chute or Discharge Opening when the machine is running.

Do not allow metal, stone, glass, or other foreign objects to be fed into the Chipper/Shredder. Use
a stick to push the tree limbs, leaves, etc. into the feed Hopper.

Do not allow Discharge Bag to overfill with processed material. This may prevent proper
discharge and can result in kickback of material through the feed Hopper.

If the machine becomes clogged, immediately turn the Engine off. Wait until the
Chipper/Shredder comes to a complete stop. Unplug the Spark Plug Wire from the Spark Plug.
Then clear the machine of the clogged material.

Keep all spectators at least six feet from the Engine during operation.

Fire Hazard! Do not fill fuel tank while engine is running. Do not operate if gasoline has been
spilled. Clean spilled gasoline before starting engine. Do not operate near pilot light or open
flame.

Do not touch engine during use. Let engine cool down after use.

Never store fuel or other flammable materials near the engine.

Only use a suitable means of transport and lifting devices with sufficient weight bearing capacity
when transporting the equipment.

Secure the equipment on transport vehicles to prevent it from rolling, slipping, and tilting.

Industrial applications must follow OSHA requirements.

Do not leave the equipment unattended when it is running. Turn off the equipment (and remove
safety keys, if available) before leaving the work area.

The equipment can produce high noise levels. Prolonged exposure to noise levels above 85 dBA
is hazardous to hearing. Wear ear protection when operating the equipment or when working
nearby while it is operating.

Wear ANSI-approved safety glasses and hearing protection during use.