14
Step 2 – Chute assembly
1.
Remove the bolt and nut from the chute base.
2.
Slide the chute into the chute base.
Note:
The chute slides into the base, if the chute fits tightly use
a light lubricant to assist installation. In some cases, the chute
lip may have excess material from manufacturing, it is
acceptable to carefully remove some material from the chute lip
in order to allow the chute to slide into the chute base.
3.
Securely install the supplied bolt and nut.
Step 3 – Chute rotation handle assembly and installation
1.
Insert the chute rotation handle eyebolt into the hole located
half way up the left handle. Secure with 2 cupped washers and
hex nut.
2.
Connect the chute rotation handles (upper and lower) using
the screws provided.
