POWX07568TX
EN
Copyright © 2016 VARO
P a g e
|
10
www.varo.com
10 CLEANING AND MAINTENANCE
Before performing any work on the equipment, pull the power plug.
10.1
Cleaning
Regularly clean the machine housing with a soft cloth, preferably after each use.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach the inside of the power tool!
10.2
Connecting cable
If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by a qualified specialist (qualified electrician).
11 TECHNICAL DATA
Nominal Voltage
230-240V ~ 50 Hz
Power rating
2000 W
No load speed
2500 min-1
Protection class
II
Blade size
254 mm x 30 mm x 2.2mm
12 CUTTING CAPACITY
Worktable tilting
angle
Head tilting angle
Height x width (mm)
90°
90°
75 x 305 mm
45°
90°
75 x 210 mm
90°
45°
45 x 305 mm
45°
45°
45 x 210 mm
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
89 dB(A)
Acoustic power level LwA
102 dB(A)
ATTENTION!
Wear
hearing
protection
when
sound
pressure
is
over 85 dB(A).
aw (Vibration)
1,1 m/s²
K = 1,5 m/s²
14 STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build-up.