background image

11 en

Always test

 a small area to avoid chance of damaging the surface. 

(Fig. 12)

 

IMPORTANT NOTE:

 When applying detergent use the soap nozzle.   

• 

When using the detergent, fill it with a properly formulated detergent or cleaner with water ratio 

according to instructions on the container 

(Fig. 13)

. The detergent tank comes with a straw which 

is fitted into the screw-on top.  If you don’t see the straw, look inside the tank and attach it to the 

screw-on top, close detergent tank when done filling.                                                                                                      

• 

When removing the detergent tank remove lid and place finger on both sides of the bottle and 

squeeze to get past the knobs on each side and pull out, press down firmly when putting it back in 

place.

•  The power washer will pull a ratio of water to detergent of 10:1 or 10 parts water to 1 part 

detergent.  The detergent concentration can be adjusted by turning the detergent knob on the front 

of the machine.  Turn it right for more concentration or turn it left for less concentration. 

(Fig. 14)

Fig. 12

Fig. 13

Adjust for detergent

concentration

Fig. 14

Summary of Contents for PJR2000





















Reviews: