How to use
s
1.
Insert the plug of the Adapter into the wall socket.
2.
Insert the plugs of appliances into the Adapter. When using multiple appliances,
add their wattages together to make sure the total DOES NOT exceed the
Adapter's wattage rating.
3.
Switch the socket switch ON. The LED neon power light on the Adapter will light
up and will go out when the socket switch is turned OFF.
4.
When any appliance attached to the Adapter is to be switched off, switch off the
appliance and detach the plug of the appliance from the Adapter. Repeat this step
for any other appliance.
5.
When the plugs of all appliances attached to the Adapter have been removed,
switch OFF the socket switch and remove the plug of the Adapter from the wall
socket.
How to clean
s
1.
Clean the Adapter only when its plug is removed from the wall socket.
2.
Wipe the exterior of the Adapter using a soft, damp cloth or sponge. Remove
stubborn spots with a cloth moistened with mild liquid detergent. DO NOT use
abrasive scouring pads or powders. DO NOT attempt to clean the interior of the
device.
3.
Never immerse the Adapter in water or other liquids.
4.
Ensure that the Adapter is completely dry before use or storage.
