1.
Remove and clean the turbine after each use. Wash it inside and out with water and
soap, using a non-abrasive brush.
2.
Dry it and put in place again.
3.
Tighten the nut by hand until the flat surface of the turbine is properly adjusted.
4.
Do not over tighten, as the turbine automatically tightens upon starting the machine.
5.
The turbine is the key for separating the dirty water from the airflow and proper care is
important for the performance of your appliance.
6.
If the turbine should become damaged (chipped or broken), bring the appliance to the
Service Center for checks and repairs.
WARNING: the appliance must NEVER be used without the turbine. Always place it back
after cleaning it.
ENVIRONMENTAL TIP
s
