HOW TO CLEAN
s
1.
Switch the appliance OFF. Wait for the appliance to cool down completely.
2.
To disassemble
a.
Loosen the Grille Ring Clips and detach the Front Grille.
b.
Holding the Fan Blade, turn the
Blade Cap clockwise
.
c.
Slide the Fan Blade out of the Motor Shaft.
d.
Turn the
Guard Mounting Nut
anti-clockwise
.
e.
Remove the Back Grille.
3.
Clean the exterior parts of the fan thoroughly with warm water & dishwashing
agent and a damp cloth, and immediately wipe dry.
DO NOT use any of the following agents as a cleaner: gasoline, thinners, or
benzene.
4.
Never run water over the appliance as malfunctions may occur if water seeps
inside the appliance.
5.
Use a vacuum cleaner to suck up dirt from the Air Inlet and Air Outlet.
6.
To assemble
a.
Insert the Back Grille through the Motor Shaft and tighten the Guard
Mounting Nut by turning
clockwise
.
b.
Slide the
Fan Blade through the
Motor Shaft. Wiggle the Wedge Groove at
the back of the Fan Blade onto the Space Pin of the Motor Shaft.
c.
Tighten the Blade Cap
anti-clockwise
.
d.
Ensuring the logo at the front of the
Front Grille is positioned properly, attach
the Front Grille to the Back Grille and secure them by tightening the Grille
Ring Clips at the bottom of the Grille Ring.
Summary of Contents for PPTF303
Page 1: ...12 DESK FAN PPTF303...
