Heating / Boiling Water
1. Place the Kettle on a dry, horizontal, stable and heat-resistant surface. Plug one
end of the power cable into the Base Socket and the plug into the wall socket.
Switch the wall socket ON. Press the ON/OFF Switch on the Handle down.
2. The boiling process commences. If the water level is below MIN, the Automatic
Safety Cut-Off Function will be activated, which prevents heating. In this case,
switch off the appliance and disconnect the power cable from the wall socket. Fill
the Kettle with more water until the water level exceeds the MIN line, but stays
below the MAX line. Repeat points 3 – 5.
3. The appliance switches off automatically several seconds after water has started
boiling.
4. The heating process can be terminated at any time by
Pressing the Power ON/OFF Switch on the Electric Kettle up,
Switching off the electric mains, and
Unplugging the power cable.
Re-boiling and Re-heating
5. Once the water has boiled, the ON/OFF Switch comes up. Pressing the ON/OFF
Switch down will not restart the heating process if the temperature sensing
controller determines that the temperature of the water is not cool enough to
require heating. Wait a few minutes before restarting the appliance.
