PowerPac IVAC POWER2 PPV2000 Manual Download Page 6

   Warnings

 

 

 
ATTENTION :  
Read this booklet carefully as it contains important instructions for a safe installation, use 
and maintenance. 
Important instructions to be kept for future reference. 

The  following  basic  precautions  should  always  be  followed  when  using  electrical 
appliances:  

1. 

Read all instructions before using the appliance. 

2. 

This appliance must be used only for the purpose it was expressly designed; any use 
NOT  complying  with  the  instructions  contained  in  the  manual  is  considered 
inappropriate  and  dangerous.  The  manufacturer  is  NOT  responsible  for  possible 
damages caused by the inappropriate and/or unreasonable use. 

3. 

This appliance is NOT suitable to be used or stored near heat sources  (open flame, 
ovens,  heaters,  stoves,  etc.)  and/or  in  an  explosive  environment  (in  the  presence  of 
flammable  substances  such  as  gas,  vapour,  mist  or  dust,  in  atmospheric  conditions 
when,  after  ignition,  the  combustion  is  spread  in  the  air).  Items  containing  these 
substances should never be placed in the appliance, and never be used to clean the 
appliance in order to avert the risk of fire or explosion. 

4. 

This  appliance must  NOT  be  used for  vacuuming  burning,  smoking,  toxic,  volatile  or 
flammable  substances.  The  appliance  must  NOT  be  used  to  clear  sewers.  An 
explosion  may  occur  if  the  machine  suctions  sewer  gases.  Sewer  gases  inhalation 
may lead to unconsciousness and death. 

5. 

It is NOT recommended to use the appliance for cleaning open stoves or other devices 
that  contains oil or grease, soot, clay dust, plaster or other similar materials that are 
resistant to water action. 

6. 

DO NOT vacuum mud, gypsum material, wall powder, blade, kindling, clumps of hair, 
large pieces of paper and other items such as sharp metal objects as that may make 
the  absorbing  inlet,  tube,  hose  and  filter  get  blocked  and  the  motor  get  burned.  An 
indication  of  blockage  may  manifest  as  an  abnormal  sound  or  poor  suction.  If  these 
small  particles  were  absorbed,  please  disconnect  the  power  cord  and  remove  them 
from the dust bag or filter immediately. 

7. 

The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of 
the  reach  of  children  or  disabled  persons  since  they  represent  potential  sources  of 
danger. 

8. 

The  installation/assembly  of  the  appliance  will  be  made  in  accordance  with  the 
indications of the manufacturer. A wrong procedure may cause damages to persons, 
animals or objects, for which the manufacturer cannot be considered responsible. 

9. 

Place and use the appliance on a horizontal, stable and heat-resistant surface. 

10. 

Before use, check the integrity of the appliance and power cable. In case you are not 
sure, contact a qualified person. If the power cable is damaged, it must be replaced by 
the manufacturer or its service agent or a qualified technician in order to avoid a shock 
hazard. 

Summary of Contents for IVAC POWER2 PPV2000

















Reviews: