PROBLEM
POSSIBLE CAUSE
SOLUTION
1
Tool repeatedly jams
1. Wrong staple size
2. Bent staple pusher
3. Clogged or damaged nose.
4. Misaligned magazine cover
1. Use only the correct size staples
2. Replace staple pusher
3. Unclog or replace nose
4. Replace or service magazine cover
2
Tools works but no
staple comes out
1. Jammed staple-feed pusher
1. Open staple-feed magazine cover and
unjam staple-feed pusher
3
Poor drive
1. Overheated tool
2. Extension cord gauge too small
1. Allow to cool
2. Use properly rated extension cord.
4
Tool will not operate
1. Plug or extension cord not getting power.
2. Trigger switch failure
3. Line cord damaged
4. Jammed driver blade/plunger
1. Check outlets and cords are live
2. Have trigger switch serviced
3. Have line cord serviced
4. Unjam driver blade/plunger
5
Tool overheats
1. Extension cord gauge too small
2. Using at too fast a pace
1. Use properly rated extension cords.
2. Pace work at a more reasonable speed
for the tool.
Here are some common issues that may occur during use.
If the stapler is not working as it should, stop using the tool immediately and resolve the issue
before continuing.
9
TROUBLE SHOOTING CHART