The Model 100 pushes against a stud
location on a stationary wall to pull the
strips into place. Great for snugging-up
end strips against walls, wall trim or
fi xed cupboards or cabinets
(see picture 1).
When a stud location cannot be
determined, a board long enough to span
the distance of the studs should be used
to prevent breaking through the drywall
(see picture 2).
If needed, the Powerjack can also be used
away from the wall by setting a stationary
anchor point anywhere near your work
area (see picture 3).
Picture 2
Picture 1
3
Picture 3