INSTALLALING THE POWER ROLLER FOOT
Stapler Disassembly:
Remove any remaining fasteners from the channel.
Mount the nailer / stapler upside-down in a padded vise.
Using a 5mm hex Allen
wrench (metric), loosen the
(4) hex screws from the base
of the existing adapter foot
(see fi gure 1 or fi gure 4).
Lift the whole adapter foot
and channel assembly off of
the stapler. Remove the (4)
hex screws from the adapter
foot.
Separate the channel
assembly from the original
adapter foot.
Figure 2.
Stapler Reassembly:
Using pliers, pull the drive
blade assembly to the top
of the nailer / stapler.
Install the channel
assembly into position over
the drive blade. Line up
the drive blade with the
opening in the channel
assembly (see fi gure 2).
Figure 1.
4
