1
1.
WARNING
Please read this instruction carefully before you
make any operation on your vehicle. This device
contains battery product that may cause personal
injuries. If you are uncertain or have questions
about this device, please call 1-888-832-3557 THIS
IS FOR 12V SYSTEM ONLY, DAMAGES CAUSE
BY IMPROPER USE WILL SOLELY
BE USER’S
RESPONSIBILITIES.
Do not crank start your vehicle for more than 5
second, or longer. This will damage your vehicle
starting system and over heat the JUMP START
battery. As a precaution, please allow JUMP
START to rest for 30 second, before starting
your vehicle.
•Do not use the device in the rain or wet conditions. Unit is not
waterproofs. The functionality of device might be affected.
•Keep the device away from where the children can access.
Never attempt to alter or disassemble the product. If there is
a problem with the product please contact your dealer for
further assistance.
•Do not allow metal to come in contact with the battery poles.
It may spark or short-circuit the battery and cause an
explosion.
•Stop using the jumpstart when you hear the alarm or cannot
turn on the JUMPSTART. The reason may be from:
①
The jumpstart device voltage is less than 9V - Charge the
jumpstart to prevent battery failure.
②
The device temperature is higher
than 140˚F (55˚C) - Cool
the jumpstart to at least
104˚F (40˚C) or below.
③
The jumpstart is connected backwards, incorrectly
connected or short connected. Correct it before start
•If Vehicle battery is less than 2V, there is no safety check to
prevent incorrect polarity hook up.
MUST READ:
Before using the JUMPSTART, read and follow the
instructions carefully. Also pay close attention to
the cautionary statements on the vehicle battery
and any other equipment.
MUST NOT DO:
NOTE:
As a safety measure, there is NO VOLTAGE present
at the clamp ends. The product automatically detects
when it is hooked up correctly to a battery, LCD
displays the voltage of vehicles battery if the
voltage is within 4V~14.2V. Only when
JUMP START
button is pressed
,
the power will be delivered to the
clamps.
