7
© 2010 Cycle Country Accessories Corporation
2D - MOUNTING HIGHLITE TO CYCLE COUNTRY or AFTERMARKET STEEL BLADES:
Remove the blade springs and install the Highlite onto the steel blade mount as shown, using washers, Item #9
and fasteners, Items #8 and #11. Torque fasteners to specification. Reinstall the blade springs onto the Highlite
bracket in the locations shown. Refer to Illustration 2C.
2E - MOUNTING HIGHLITE TO AN ATV RACK OR SIMILAR MOUNTING AREA:
Install the Highlite using u-bolts, Item #4, with washers and knob fasteners, Items #10 and #3. Hand-tighten
knob fasteners, using care not to over-tighten. Refer to Illustration 2D.
Install blade springs at this location
Ill. 2D
11
8
9
Item #8, #11 FASTENER TORQUE:
17 ft. lbs. (23 Nm)
Ill. 2E
4
10
3
