5
30. Check the workpiece carefully for splits, knots
or other obstructions which may cause a
safety risk while turning.
31. Adjust the tool support to the proper height
and position for the work. Rotate the
workpiece by hand to check clearance with the
tool support.
32. Select the appropriate speed for the turning
job at hand. Start at low speed and allow the
Lathe to ramp up to operating speed.
33. Never stop a rotating workpiece with your
hand.
34. If gluing up a workpiece, always use a high-
quality glue of the type necessary for that
particular workpiece.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
4.0
Introduction
This manual is provided by Powermatic covering the safe operation and maintenance procedures for a Model
PM2020 Lathe. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed
to provide consistent, long-term operation if used in accordance with instructions set forth in this manual. If
there are any questions or comments, please contact either your local supplier or Powermatic. Powermatic can
also be reached at our web site: www.powermatic.com.
Register your product using the mail-in card provided, or register online:
http://www.powermatic.com/us/en/service-and-support/product-registration/
WARNING:
This product can expose you to
chemicals including lead and cadmium which
are known to the State of California to cause
cancer and birth defects or other reproductive
harm, and phthalates which are known to the
State of California to cause birth defects or
other reproductive harm. For more information
go to http://www.p65warnings.ca.gov.
WARNING:
Drilling, sawing, sanding or
machining wood products generates wood dust
and other substances known to the State of
California to cause cancer. Avoid inhaling dust
generated from wood products or use a dust
mask or other safeguards for personal
protection.
Wood products emit chemicals known to the
State of California to cause birth defects or
other reproductive harm. For more information
go to http://www.p65warnings.ca.gov/wood.
