Questions? Call Toll Free at 1-800-737-2112
EN-7
Copyright © 2018 MAT Engine Technologies, LLC
Assembly
(Continued)
• Save all instructions
Wheel Assembly:
D
String Storage:
E
1 . Install the right wheel to the frame using the longer
shoulder screw and spacer . Tighten to 25 ft . lbs .
(34 N .m) torque using a 14 mm wrench . (Fig . 9-10)
2 . Install the left wheel to the adjuster assembly stud
using the shorter shoulder screw . Tighten to 25 ft . lbs .
(34 N .m) torque . (Fig . 11 & 12)
3 . Move the bevel handle to the low position for
level mowing .
1 . Snap the lower tube clip onto the left middle handle
using the pierced hole . (Fig . 12)
2 . Snap the upper tube clip onto the left middle handle
above using the pierced hole .
3 . Install the clear tube with provided extra string
into the clips . (Fig . 13)
Fig. 12
TUBE CLIP
Fig. 13
UPPER
CLIP
TOP CAP
LOWER
CLIP
Debris Guard:
C
1 . Insert the tab on the metal mounting bracket into the
slot on the debris guard . (Fig . 5-6)
2 . Install the hex head cap screw through the bracket
and into the metal insert of the debris guard .
Tighten securely using a 10 mm wrench . (Fig . 7-8)
The trimmer line knife attached to the debris guard is
sharp and can cut you . Handle with care .
CAUTION
SLOT FOR
BRACKET TAB
DEBRIS
GUARD
HEX HEAD
CAP SCREW
HEX HEAD
CAP SCREW
METAL MOUNTING
BRACKET
METAL MOUNTING
BRACKET
Fig. 5
Fig. 7
Fig. 6
Fig. 8
SPACER
Fig. 9
Fig. 11
Fig. 10
Fig. 12
SHOULDER
SCREW
(SHORTER)
BEVEL
HANDLE
SHOULDER
SCREW
ADJUSTER
ASSEMBLY
