17
PARAMETERS TABLE PADS
MAINTENANCE AND SERVICE
Maintenance
WARNING!
The electrical shock can cause serious injury or even death. Under no circumstances may touch parts
WARNING!
The electrical shock can cause serious injury or even death. Under no circumstances may touch parts
under voltage wiring such as terminals or the internal components of the device. Prior to the maintenance welder
must be disconnected from the mains.
The device should be cleaned with dry air of low pressure, thereby removing contaminants must be formed on the
housing and the vents. It is necessary for the proper functioning of the device.
An important aspect is the state of the external wiring, welding machines, which need to be checked regularly. In the
event of damage, contact a qualified service welding equipment. Changing the wiring on the other performed inside
the device it is not recommended and may result in denial of warranty. All changes to the wiring should be done by
changing the external wiring.
Changing the power wiring can be performed only by a welding equipment.
