![Powerlink PL-3000 SERIES Owner'S Manuel Download Page 11](http://html.mh-extra.com/html/powerlink/pl-3000-series/pl-3000-series_owners-manuel_1589696011.webp)
11
FEATURES AND OPERATIONS
PANIC MODE:
With engine not running, keep pressing
button for 2 seconds: panic mode is engaged. The horn or siren will be
triggered. To stop the panic mode simply press
button.
VALET MODE:
To disarm the system in case of transmitter loss or for vehicle servicing, you must perform the sequence twice to enable
the valet mode. The first time will disarm the alarm and the second time will enable the valet mode. Under valet mode,
door locks, remote start, trunk are still functional.
TO ACTIVATE OR DEACTIVATE VALET MODE:
VIA TRANSMITTER:
VIA VALET SWITCH:
Step 1:
Turn key ignition to ON position and do
not start the engine, you have 15 seconds
to do step 2 and step 3.
Step 2:
Hold brake pedal depressed.
Step 3:
Keep pressing the
button for 2
seconds, vehicle horn or siren will emit 5
beeps.
a.
When valet mode is enabled: L.E.D. turns
ON steady.
b.
To deactivate valet mode repeat steps 1,
2 and 3: L.E.D. will turn OFF.
Step 1:
Put ignition to ON and do not start the
engine, you have 15 seconds to do step 2.
Step 2:
Hold brake pedal depressed and press
valet switch at least 3 times.
a.
When valet mode is enabled: L.E.D. turns
ON steady.
b.
To deactivate valet mode repeat steps 1
and 2: L.E.D. will turn OFF.
Note: if 15 seconds expire just turn off the ignition key, then start step #1