Powerline PLPX, Owner'S Manual

Page: 2 / 23

Thank you for purchasing the Powerline Leg Press. This piece is part of the Powerline
line of quality strength training machines, which let you target specific muscle groups to
achieve better muscle tone and overall body conditioning.
Be careful to assemble all components in the
sequence presented in this guide.
If any items are missing, contact the dealer from
whom you purchased the unit or call Body-Solid
Customer Service at 1-800-833-1227.
Unpacking the Equipment
The Powerline Leg Press is carefully tested and
inspected before shipment. We have shipped
the unit in several pieces that require assembly.
Ask for assistance during the assembly process.
Carefully unpack the boxes and lay the pieces
on the floor near the area where you plan to use
the equipment.
When you attach the Leg Press attachment,
leave all nuts and bolts hand tight, until the last
step is complete. Then go back and wrench
tighten all nuts and bolts.
CAUTION: To set up this unit, you will need assistance.
You must review and follow the instructions in this Owner’s Manual. If you do not assemble and use
according to these guidelines, you could void the Powerline warranty.
CAUTION:
Obtain assistance.
Review the Installation Requirements before
proceeding with the following steps.
Installation Requirements:
Set up on a solid, flat surface. A Smooth, flat
surface under the machine helps keep it level.
A level machine has fewer malfunctions.
Provide ample space around the machine.
Open space around the machine allows for
easier access.
NOTE: With so many assembled parts, proper
alignment and adjustment is critical. While
tightening the nuts and bolts, be sure to leave
room for adjustments.
Insert all bolts in the same direction. For
aesthetic purposes, insert all bolts in the same
direction unless specified (in text or illustrations)
to do otherwise.
Leave room for adjustments. Tighten fasteners
such as bolts, nuts, and screws so the unit is
stable, but leave room for adjustments. Do not
fully tighten fasteners until instructed in the
assembly steps to do so.
Fill out and mail warranty card.
2
Before You Begin