13
Using Your Remote
‣
Ensure the unit is turned on and the laser is rotating.
‣
Press the speed control button to increase or decrease the speed of
the lasers rotation.
‣
To focus the laser beam between two points press the scanning mode
button. Pressing the button multiple times will adjust the angle of the beam.
‣
Press the clockwise or counter clockwise button to change the
rotation of the laser head while the laser is in scan mode.
‣
To create slopes or grades press the manual / automatic mode button
to enter into manual mode. The Y axis up and Y axis down button allow
adjustment of the tilting angle.
