9
Figure 1: List of all major components
Check these components according to
the following list and Figure 1.
A. Log guiding plates
B. Log pusher
C. Operating handle assembly
D. Wheel and frame
E. Oil pump
F. Electrical motor switch
G. Electrical motor assembly
H. Supporting feet
I. Main body
J. Splitting wedge
All the screws, bolts, washers, and jig
are in the packing box. (The complete
list is on the attached part list).
INSTALLATION OF WHEELS &
SUPPORTING FEET
Carefully remove the log splitter from
the packaging box, with the help of
another able person, and place it on the
foam material (block) that came in the
packaging box. (See Figure 2).
Place the main part of the machine on
the foam material (block) and assemble
the supporting feet (Part 19) using 2
screws (Part 21) and 2 nuts (Part 20).
Tighten the screws and nuts. (See Figure
3).
With the main part on the foam block
and supporting feet attached, use the
safety ring (Part 59) to attach 2 wheels
(Part 60) onto the shaft of the wheel
frame (Part 61), and then use the wheel
shaft cover (Part 58) to cover the wheels.
Once in place, check the wheels to make
sure they rotate properly. (See Figure 3).
Installation of operating handle
Remove the operating handles (Parts
54/55) from the box, and screw them
onto the corresponding hole of the
handles. Tighten the screws. (See Figure
4).
Now the log splitter is ready to use.
