Connect the water hose to the water hose con-
nector (9) on the back of the washer. There is
an inlet filter already fitted in the coupling to
filter out impurities, as these will damage the
pump valves. There is also a rubber gasket
fitted into the inlet (and an extra in the bag
with this manual). If the hose leaks where it
connects to the machine, make sure that the
gasket is in place. Two gaskets can be used if necessary. You can tight-
en the connection with the enclosed
wrench. At left is a picture of the filter
location
, if you need to clean it.
Turn the water fully on.
Plug-in the Power Cord
Refer to the “General Safety Instruc-
tions” section above for safety precau-
tions.
9