Powerhorse M16620D, Owner'S Manual, Page: 21 / 44

Operation
21
Clearing Jam
WARNING: Shut Off Engine to Clear Jam
Before attempting to unclog debris or clear a jam: shut off the engine, disconnect spark plug wire, and wait
for all moving parts to come to a complete stop.
5. Refueling On Site
WARNING: Static Electric Spark Hazard
A static electric spark can explosively ignite gasoline vapor, resulting in a flash fire that could cause serious
injury or death. See attached description of Static Electric Spark Hazards.
WARNING: Hot Engines Can Ignite Fuel

Turn engine off and allow to cool for at least five minutes before removing fuel cap.

Remove engine fuel cap.

Add gasoline through the fill opening:
Use only an UL-approved portable gasoline container to transfer gasoline.
Follow the safety warning and instructions below for avoiding static electric sparking.

Clean up gasoline spills /splashes immediately.
If possible, move the chipper/shredder away from spilled gasoline on the ground.
Wipe up spilled gasoline. Wait 5 minutes for gasoline to evaporate before starting engine.
Gasoline soaked rags are flammable and should be disposed of properly.
If gasoline is spilled on your skin or clothes, change clothes and wash skin immediately.

Replace gasoline cap securely before starting engine.

Store extra gasoline in a cool, dry place in an UL-approved, tightly sealed container.
1. Remove the top shredder hopper.
2. Wearing gloves and using a piece of
wood, push/pull clogged material
up and out of the knife rest area.
3. Reinstall top shredder hopper
before operating.
4.
Remove outlet body to loosen bolts.
5. Expose the screen and loosen wing
nuts.
6. Rotate screen to expose blockage.