background image

About Your Log Splitter 

 

4

 

 

Thank you for purchasing your Powerhorse log splitter! 

 

About Your Log Splitter 

 

This log splitter is a machine designed to split wood logs using a hydraulically powered moving wedge.  
The gasoline-powered engine is used to pressurize the system. 

 
 

This log splitter model is capable of splitting logs up to 24” long and 16” in diameter

 
 

This log splitter is designed to split logs 

lengthwise with the grain only

 
 

This log splitter model is designed with a 

unique, timesaving feature

 -- a double-edged cutting wedge that 

is capable of splitting wood on both the extension and retraction strokes of the wedge. 

 

 

 

The technical specifications for your log splitter are provided in the “Specifications” section

 

of this 

manual. 

 

WARNING 

This log splitter uses a high-pressure hydraulic system to generate a very strong 
splitting force

. Read the manual completely 

before using the machine to understand 

how to safely operate and maintain it.

 

 

Follow all safety precautions presented throughout this manual.  A summary of important safety 
information can be found at the end of the manual

 

Contact Powerhorse Product Support at 1-866-443-2576 for any questions about the 
appropriate use of this log splitter and/or optional accessories. 
 

 
 
 
 

Warranty Registration:

 

Please fill out and submit the warranty registration card so that we may have your contact information for 
any future product literature or replacement parts you may need. 

 

Attention: All Rental Companies and Private Owners who 

loan this equipment to others! 

 

All persons to whom you rent/loan the log splitter must have access to and read this manual

.  Keep this 

owner’s manual with the splitter at all times and advise all persons who will operate the machine to read 
it.  You must also provide personal instruction on how to safely operate the splitter and available to 
answer any questions a renter/borrower might have.

Summary of Contents for M11571E









































Reviews: