°
°
bove 80
F
more frequently.
Below 40 F
(
)
the use of SAE 30 will result in hard starting
.
A
(
27
C
)
the use of 10W-30 may cause increased oil consumption. Check oil level
1.
2.
3.
Move Throttle lever (D) to MIN. position. Turn
Engine switch (F) to the OFF position.
Turn Fuel
shutoff
(I) to the OFF position.
Troubleshooting
If
Engine will not
start
Out of fuel
.
If engine is cold, ensure choke lever is set correctly. .
Add fuel
Engine flooded
. Set choke lever to open/run position
Dirty or faulty
spark plug/engine fails to product spark
Remove spark plug and clean it. Check the spacing on the electrode and set the gap to the
.
correct dimension.
See Maintenance Section. If plug is damaged, replace with a new spark plug.
. Ensure the spark plug is installed and wire is connected.
Wa
rning
:
. Do not crank engine with spark plug removed.
Oil
Oil Recommendations
.
We recommend the use of
suitable
oils for best performance. Other high-quality detergent oils are
acceptable if classified for service SF, SG, SH. SJ or higher.
. Do not use special additives.
. Outdoor temperatures determine the proper oil viscosity for the engine. Use the chart to select the best viscosity
for the outdoor temperature range expected.
Note:
°
°
Before adding or checking the oil
· Place engine
on a level surface
.
· Clean the oil fill area of any debris.
6
4 C
