Out of Box Assembly Instructions
Swivel Handle
(“S”),
Swivel Pivot
(“SP”) &
Center Straight
(“C”) Handle PowerRolls require the handle assembly be attached
to the base machine unit and the quick-connect electrical connections completed.
Center Straight
(“
C
”) Handle Assembly Instructions
STEP 1: Loosely install the four handle attachment
screws and lock washers on the machine base.
STEP 3: Position Handle Mount over mounting
screws and lock washers by sliding mount down.
Ensure all lock washers are seated under screw
heads and not trapped between the mount and
base.
STEP 2: Carefully insert the (male) connector from
the wire harness of the handle to the (female)
connector exiting from the machine chassis.
STEP 4: Tighten all four handle mounting screws
and then insert a battery pack. You’ll want to test
that the drive roller rotates when given a throttle
input.
4 of 20
2020/
10
