LV710 Freight Camera - Dry Van Swing Door Installation
Revised: 05/23/19 1
Required Tools & Supplies:
Safety Glasses
Loctite Threadlocker Blue 242
Cordless Drill with Battery
Phillips Screwdriver #2
Spring-loaded Punch
Sikaflex 252
Tape Measure
Caulk Gun
Permanent Marker
#25 Drill Bit (.1495”)
2 5/8” Hole Saw
Deburr Tool
¾” Hole Saw
External Caliper Gauge (digital)
12” Groove Lock Plier
3/16” Drill Bit (countersink only)
Flat Blade Screwdriver (countersink only)
Router (countersink only)
5/16” Rabbet Router Bit (countersink only)
3 3/8” Hole Saw (countersink only)
10-24 Tap
Cutting Oil
Installation Requirements:
1.
Device must be installed on rear curbside door next to inner locking rod.
2.
Overall door thickness must be ≤ 1.125”. Overall door thickness measurement must include any
interior and/or exterior sheathing in addition to the door core.
Do not include any weather-
stripping around door edges in the thickness measurement.
a.
Device will be installed by using
Standard Installation
procedure (pgs. 4-20) on doors with
thickness ≤ .75”.
b.
Device will be installed by using
Countersink Installation
procedure
(pgs. 21- 39) on doors
with thickness > .75” and ≤ 1.125”.
c.
Doors with overall thickness > 1.125” cannot be installed.
Measure overall door thickness with external caliper
