Powerfix Profi Z31174, Operation And Safety Notes

Page: 17 / 120

17 GB/CY
Note: When the battery symbol appears in the
display
2
, replace the battery. With a weak
battery you may receive an inaccurate or false
measurement result.
Use
Measuring distances
1. Slide the function switch
9
to the position
„DISTANCE“. The display
2
is turned on.
2. Hold the appliance horizontally to the wall at
the distance you wish to measure. The ultra-
sonic - transmitter / receiver
16
must point at
the wall at a right angle. Use the vial to do
this
8
: direct the appliance so that the air
bubble in the vial lies between the two marker
lines.
3. Press the READ button
6
. The measured
distance appears in the display.
Note: Hold down the READ button and move
the appliance and move the appliance further
over the surface to be measured. The appli-
ance measures the distance continuously.
These are displayed in the display.
Setting the measuring unit
You can choose between the measuring units of
metre (m) and foot (‘…“).