7
GB/IE
Introduction / Safety information
Length:
approx. 2.00 m
Weight:
1950 g
Parts description
1
Light bulb (energy-saving lamp)
2
Adjusting screw (screw for adjusting the angle)
3
Stop (end stop for max. tilt)
4
Cable (lead including shock-proof plug)
5
Protective frame (protects the housing)
6
Adjusting screw (back) (crosshead screw for
locking the view cover)
7
Reflector (bundles light emission)
8
View cover (locks the energy saving work light)
9
Spacer retaining ring (for correctly positioning
the lamp)
10
Lampholder
11
Spacer (controls the distance between the
housing and adjusting screw)
12
Carrying handle (for carrying and adjusting
the energy saving work light)
13
Right switch (back) (except lamp
I
= on /
O
= off)
14
Left switch (back) (centre lamp
I
= on /
O
= off)
15
Handle (for carrying and adjusting the energy
saving work light)
16
Cord wind (for winding and storing the cable)
Safety information
IMPORTANT:
Please observe the following infor-
mation when using the energy saving work light to
prevent personal risks or property damage due to
improper use.
Damages caused by failure to observe these oper-
ating instructions, particularly the safety notices,
will void the warranty. We assume no liability for
personal injuries and property damage caused,
and resulting subsequent damages.
Danger: Failure to observe will
result in danger to life and risk
of injury as well as risk of prop-
erty damage!
Pass the operating instructions on to third parties.
Ensure third parties only use the energy saving
work light after receiving the necessary instruc-
tions.
The energy saving work light is protected against
moisture and splash water. Protection class:
IP 44. Never immerse the energy saving work
light in liquids. Risk of electric shock!
Only connect the energy saving work light to a
mains supply which meets the „Technical data“.
Discontinue use if defects are noticeable.
When suspecting it can no longer be safely
operated, immediately discontinue use of the
energy saving work light. Secure the energy
saving work light against accidental operation.
Operation is no longer safe if the product is not
working or shows visible damage, etc.
Do not manipulate the energy saving work light.
Never open the energy saving work light (ex-
cept when changing the bulb), manipulate or
modify. This action poses a risk to life due to
electric shock and is prohibited.
The energy saving work light has no parts for
the user to maintain.
This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
Do not use in flammable or explosive environ-
ments.
Do not use the energy saving work light in flam-
mable and explosive environments containing
flammable liquids, gasses or dusts. The energy
saving work light is not approved for this envi-
ronment.
Regularly check the energy saving work light
for visible damage.
94089_Energiespar-Arbeitsleuchte_content_GB.indd 7
10.12.13 07:19
