10
Power Legs
Maintenance & Cleaning
Cleaning
•
Before cleaning the device, make sure that the
Power Switch is off and that the Power Cord is
unplugged from the outlet.
•
Clean the device and the silicone pads with
a damp cloth and mild detergent. Do not use
abrasive or corrosive cleaning agents.
•
The silicone pads can be removed to make
cleaning easier.
•
Never allow the device to come into contact with
water or other liquids.
• Do not clean the device with corrosive
substances because you can damage the device.
• Clean the remote control with a clean cloth.
• If you are not using the device for a long time,
put it in its packaging box and store the box in
a cool, dry place. Remove the batteries from the
remote control.
•
If the device presents any issues that cannot be
solved using the solutions in the Troubleshooting
section, please contact Customer Service using
the contact information in the back of this manual.
Storage
•
When the device is not in use, store in a cool,
moisture-free environment.
Issue
Cause
Fix
The Unit
does not work.
The Power Cord is not plugged into a power outlet.
Connect the Power Cord to a power outlet.
The Power Switch is in the Off position.
Place the Power Switch in the On position.
The Remote Control
does not work.
The Remote Control’s batteries are dead.
Replace the batteries.
The remote control is too far away from the Unit
’
s
Infared Receptor.
The effective distance of the Remote Control
is 6.56 feet.
The machine stopped
working suddenly.
The programmed exercise time ended.
Reset the exercise time.
The Unit is
not responding.
Too many commands were input at once and
the Unit cannot respond to all of them.
Turn off the Unit, wait 1 minute, and turn the Unit
back on again.
Troubleshooting
PF_PL_IB_TP_ENG_V2_191217.indd 10
12/17/19 6:27 PM
