Powerfist 18V Cordless Impact Driver
10
For technical questions call: 1-800-665-8685
V 4.0
8534067
5. If repairs are required, bring your tool to an authorized service center.
6. Keep the vent passage clear from dirt. Clean off the accumulated dust and oil dirt periodically.
7. During normal operation, if anything happens, the power supply should be cut off at once
and the tool should be checked and repaired.
8. Clean the tool after each use.
CAUTION! Only a qualified service technician should repair the tool.
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust,
oil, grease, etc.
Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to
accelerated wear and possible premature failure because the fiberglass chips and grindings are highly
abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommend using this tool
for extended work on these types of materials. However, if you do work with any of these materials, it is
extremely important to clean the tool using compressed air.
LUBRICATION
This tool is permanently lubricated at the factory and requires no additional lubrication.
STORAGE
When storing, always remove the battery pack from the tool. Keep the tool and its accessories in a
clean, dry location and out of the reach of children.
DISPOSING OF THE TOOL
1. If your tool has become damaged beyond repair, do not throw it out. Bring it to the
appropriate recycling facility.
2. Do not incinerate battery packs. Battery packs may explode when exposed to high heat.
