3
Installation
The following points must be respected when choosing a location for
the charger.
1.
The location must be dry, dust-free and indoor. The acceptable
temperature range for operation is –20°C
*)
to +40°C. A higher ambient
temperature will limit the current supply, see appendix A on page 6.
Caution: The charger is not waterproof. Keep the charger dry and
away from areas with high humidity in order to avoid the risk for
electrical shock and damage to the charger.
2.
The equipment may be installed horizontally or vertically. The
horizontal position, however, is recommended with a height of 1
meter above floor level.
3.
To ensure sufficient ventilation, leave a free space of at least 10 cm
around all sides of the charger. Do not cover the unit.
4.
The charging process generates explosive hydrogen gas. Keep the
area well ventilated. Never use an open flame and avoid sparks close
to the battery and charger.
5.
In case the charger is mounted vertically with the cable plate
downwards, the floor and material below the charger must be fire–
resistant. Vertical positioning is prohibited if this condition cannot be
met. Install the charger using the two mounting brackets, one at each
side of the charger as shown in the figure. Fasten the brackets to the
wall using the mounting holes in the brackets. Fix the sticker (see
appendix C), if provided, to the top–side of the charger. Plug the main
power cord into an earthed mains outlet.
All manuals and user guides at all-guides.com