Air Curtain
Owner’s Manual
Models:
TFD | TSD | EHD |BPA | XPA
CHECK FOR DAMAGE: When you receive your air cur-
tain, immediately check for visible or concealed dam-
age. Claims should be made immediately to the trans-
portation company. Powered Aire will not be liable for
damage claims submitted late.
LOCATE AND RETAIN THE SERIAL NUMBER: The
unit’s serial number is necessary to request technical
support, order replacement parts or to acquire a wir-
ing diagram. The serial number is located on a silver
sticker located on the right side end cap when facing
the front of the air curtain.
IMPORTANT!
1.
2.
2
Trained and experienced mechanic/electrician required
for installation.
Powered Aire will not be responsible for misplaced
switches.
If remote switches are supplied with
the air curtain they are shipped inside
the Control Panel enclosure.
Location of
Remote Switches
Please review the following instructions for unpacking your air curtain and pre
-
paring it for installation.
1.
Remove shrink-wrap and wood slats from
top and sides of crate.
2.
The air curtain has rear flanges with six holes for
1/2 inch bolts which are used to lag the unit to the
bottom of the crate frame. Unscrew to remove air
curtain. For convenience, these same holes can
used if mounting the air curtain directly to the
wall.
Electrical Installation:
Units must be field wired in accordance with all local and national electric
codes, including wire size and materials.
1
For PARTS, TECHNICAL SUPPORT or INFORMATION
call: 1-888-321-2473
