8
© 2018 • 17cH54_20778
STORAGE
Store in a clean dry place.
Never store a wet cab in an enclosed area as it can develop mildew.
Avoid folding the plastic windows of the cab for long periods.
BOLTS
Check all bolts before each use to see that they are tight. If one or more bolts come loose, failure of cab parts may occur.
WINDOWS
Don't clean the plastic windows when they are dry—you can scratch them.
Hose them with water and rub them with your bare hands. Liquid soap may be used.
During freezing weather an automotive windshield cleaner and a soft cloth will work (don't use your bare hands with the cleaner).
Fabric areas of the cab may be washed with a rag. Don't use soap as it may remove protective coatings added by the factory.
CARE AND MAINTENENCE
TROUBLESHOOTING
Problem
Possible Cause
Corrective Action
Cab front interferes with the
snow thrower controls.
Main frame [A] is mounted
too low.
Adjust the position of mounting posts (T)
so cab clears controls. Note: it may be
necessary to mount the 1" mounting post
upper clamp pieces (T) on the vertical
side frame.
REPLACEMENT PARTS
PARTS
See page 3 for part description and part numbers.
