10
•
After successfully starting your vehicle, the power bank will
automatically reset.
•
Do not crank the engine more than 3 times in succession.
•
If your vehicle fails to start, unplug the Battery Clamp Cable from
the power bank, wait for 15 minutes, then reconnect the cable and
try again to start the engine again.
Charging USB Devices
Perform the following steps to charge a USB device, such as a tablet, phone,
etc.
1.
Plug one end of your device's charging cable into one of the USB
Type-A Output Ports or into the USB Type-
C™ Input/Output Por
t for
a USB-
C™ device, then plug the other end into your device's
charging port.
2.
Momentarily press the Power Button on the power bank to start
charging.
Using the LED Lamp
1.
Press and hold the Power Button for about 3 seconds to turn the
LED Lamp on.
2.
Momentarily press the Power Button to cycle through the Full On,
Flashing, and SOS light modes.
3.
Press and hold the Power Button for about 3 seconds to turn the
LED Lamp off.
