86
Maintenance and Service
5.4.4
Installing the trough battery
Set the key switch to position 0
(refer to paragraph “Key
switch” in Section 3.2.3) and
remove the key.
1. Open the side doors to the left and
2. Take hold of the seat console
(Fig. 26/1) at the handle (Fig. 26/2)
and pivot it forwards to open it.
If a cab safety roof is fitted,
open the seat console from the
right-hand side of the vehicle
otherwise your hands could be
crushed between the seat con-
sole and cab safety roof.
Install the trough battery in the vehicle
from the left-hand side of the vehicle us-
ing lifting gear or a fork-lift truck accord-
ing to the Figure 26.
If the scrubber drier is fitted
with a cab safety roof, the
trough battery can only be in-
stalled from the left-hand side
of the vehicle; the cab safety
roof is provided with a recess
(Fig. 26/4) for the lifting gear
rope.
When installing the trough bat-
tery, use appropriate lifting
gear.
The battery may only be in-
stalled using lifting gear by
properly trained personnel.
Connect the battery plug (Fig. 26/6) and
vehicle socket (Fig. 26/5) to each other.
Ensure they are connected firmly.
5.4.5 Disposing of batteries
Used batteries with the recycling sym-
bol contain reusable commodities. The
heavy metals contained represent a
major risk both to people's health and to
the environment. Never open or dam-
age batteries. Never touch, inhale or
swallow the content of batteries. Health
hazard! Do not allow batteries to get
into the environment. Risk of contami-
nating the ground and water!
In accordance with symbol with the
crossed out garbage bin, these batter-
ies must not be disposed of in domestic
waste. Return and recycling of old bat-
teries must be agreed on with the au-
thorized PowerBoss dealer in accor-
dance with national requirements.
