Powerblade VS600e User Manual Download Page 4

18" Electric Start Lawn Mower - VS600e 

 

E&OE 

© 2020 Power Blade 

  Do not change the engine governor settings or over speed the engine; 

  Disengage all blade and drive clutches before starting the engine; 

  Start the engine or switch on the motor carefully according to instructions and with feet well away from the blade(s); 

  Do not tilt the lawnmower when starting the engine or switching on the motor, except if the lawnmower has to be tilted for starting. In this case, do 

not tilt it more than absolutely necessary and lift only the part which is away from the operator; 

  Do not start the engine when standing in front of the discharge chute; 

  Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times; 

  Never pick up or carry a lawnmower while the engine is running; 

  Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where a key is fitted 

remove the key: 

  Before clearing blockages or unclogging chute. 

  Before checking, cleaning or working on the lawnmower. 

  After striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the lawnmower; 

  If lawnmower starts to vibrate abnormally (check immediately). 

  Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where a key is fitted 

remove the key: 

  Whenever you leave the lawnmower. 

  Before refuelling. 

  Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the conclusion of 

mowing. 

  Go slow when using a trailing seat. 

Maintenance and Storage 

  Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. 

  Never store the equipment with petrol in the tank inside a building where fumes can reach an open flame or spark. 

  Allow the engine to cool before storing in any enclosure. 

  To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area free of grass, leaves, or excessive grease. 

  Check the grass catcher frequently for wear or deterioration. 

  Replace worn or damaged parts for safety. 

  If the fuel tank has to be drained, this should be done outdoors. 

Battery Usage Precautions 

  Please use according to the specification. 

  Please note that wrong usage may lead to electric shocks, smoke emissions, glowing lights and damage. 

  When using the battery, the input voltage/temperature range must conform to specifications, otherwise it can cause damage. 

  Do not place in environments with high temperatures, humidity, dust or corrosive elements. 

  Do not cover-up the battery while charging it. Otherwise, it can cause damage/deformation/scalding, etc. 

  When the battery is fully-charged, please remove it from the charger and remove the charger plug from the power socket. 

  Under the stipulated storage conditions, if the storage time is greater than 6 months, it will need to be charged at least 2 hours, otherwise, it may 

shorten the service life. 

Battery Safety 

  Activation: Activate every three months, Activate with charger and machine (charge-discharge-charge). 

  Storage and transportation: If the battery pack is stored for more than three months, Battery packs should be stored at low temperatures, in a dry 

place. The transportation process should avoid any violent vibrations, impacts, exposure to sun and rain, etc. 

  When the battery is not in use, please remove it from the device. 

  Keep the battery clean and dry. 

  The two-cell battery can perform better when used at room temperature. 

  If there is stain on the surface of the battery, wipe it with a dry, clean cloth. 

  After a long storage period, the battery needs to be activated several times to ensure maximum efficiency. 

  When dealing with a secondary battery, please separate it from other electrochemical systems products. 

  Waste battery should be disposed of by the relevant disposing unit. 

  The improper use of a lithium ion battery can cause battery damage and even endanger personal safety. Please read carefully, use correctly and 

take precautions. 

  Electrical performance abuse: 

  Charge and use according to specifications. 

  Use Lithium - ion specific charger. 

  Ensure that the polarities are correct when charging. The battery cannot be charged in reversed polarities. 

  Do not plug in the battery on the charger when it is not in use. 

  Environmental abuse: 

Summary of Contents for VS600e

































Reviews: