The amplifier should be protected from exposure to moisture and direct sunlight. The best places to mount
your amplifier are: The floor of the trunk, under the driver’s seat, or on the back of the rear seat. For alternate
installation locations, please consult your dealer.
*** WARNING ***
•
Do not install in a place where it could injure the driver or passengers if the vehicle
stops suddenly.
•
Upside down mounting will compromise heat dissipation through the heatsink and
could engage the thermal protection circuit causing the amplifier to shut down.
•
Try to avoid mounting the amplifier on a subwoofer enclosure, as extended exposure
to vibration may cause the amplifier to malfunction.
•
Don’t mount the amplifier so that the wire connections are unprotected or are sub-
ject to pinching or damage from nearby objects.
•
The DC power wire must be fused a maximum of 12” from the battery positive (+)
terminal. Before making or breaking power connections at the amplifier power ter-
minals, disconnect the DC power wire at the battery end.
•
The battery supply of the car audio system must be disconnected until the entire
wiring and installation is completed.