CONTROL PANEL LAYOUT
Fig.2 Panel Layout
NOTE: Panel Layout and Controls may differ by model.
1. Line INPUT (RCA) Jacks
These RCA style input jacks are for use with source units that have RCA line level outputs. A source unit with a
minimum output of 250mV is required for proper operation. However, this input will accept levels up to 10Vrms.
2. GAIN Control
This control is used to match the input sensitivity of the amplifier to the particular source unit that you are
using up to 6 volts.
3. AUTO-TURN ON
Eliminates the need to run a dedicated remote wire for amplifier power on/off. Works with high level only (HL-
AD2 adapter required as shown on page 13)