background image

PREPARING for INSTALLATION

NOTE:

 The tools listed below may be required for proper installation.

• An electric drill with drill bits
• Phillips-head and standard screwdrivers
• Wire strippers
• Crimping tool and needle-nose pliers
• Silicone sealant or closed cell weather-stripping
• Metal file
• Dust mask (when cutting into fiberglass)
• Hole saw or jig saw
• Punch or countersink tool

NOTE:

 The stainless steel hardware supplied with your PowerBass Xtreme speaker has been chosen to 

resist rust and corrosion. If the particular hardware supplied will not work for your installation purposes, 
please be sure to use only appropriate marine grade (stainless steel) mounting hardware.

INSTALLATION APPLICATION

Your PowerBass XL PowerSports woofer is specifically designed for PowerSports applications. The XL Pow-
erSports Woofer is capable of reproducing impressive levels of bass. Whether you choose a FreeAir, sealed 
or a ported enclosure, the XL PowerSports Woofer opens up a whole new range of installation options for 
marine audio enthusiasts.

CAUTION:

 These speakers are designed to be water and spray resistant, they are not designed to be 

submerged or to withstand high pressure water spray. Care must be exercised when washing your vehicle 
to avoid damaging your speakers.

7

Summary of Contents for XL PowerSports Series

















Reviews: